Download Print this page

To Display Rain Data In Metric Units In Weatherlink Software - Davis Instruments Metric Rain Calibration Insert Setup Instructions

Metric rain collector for vantage pro

Table of Contents

To Display Rain Data in Metric Units in WeatherLink Software

In the Weatherlink Software, select the ".01 in" rain collector in the

Station Config dialog box found in the Setup menu.

Note: Do not select .2 mm or .1 in in the Station Configuration dialog box. The

.2 mm and .1 in settings are not currently supported by the rain collector

shipped with Vantage Pro .

Select "mm" for rain in the Select Units dialog box.

Select the "mm" set-

ting for Rain in the

Choose Units dialog

box.

Page 2

Use the ".01 in" Rain Collector setting.

Table of Contents

Do you have a question about the Metric Rain Calibration Insert and is the answer not in the manual?

63106310eu6310uk6310c6310ceu6310cuk