Table of Contents
Advertisement
Maintenance
Cleaning the Unit
Ensure the unit is fully unplugged from the mains socket before cleaning.
•
Use a soft dry cloth to wipe away the dust
from the screen and surfaces.
•
If the surfaces are extremely dirty, clean the
monitor with a cloth which has been dipped
in a slightly soapy water. Wring the cloth
until it is almost dry, then use it to wipe the
monitor.
•
Ensure there is no excess water on the screen.
Allow any water or dampness to evaporate
before switching the monitor on.
• Never use alcohol, benzine, paint-thinner, cleaning fluid or other chemicals.
• Do not use compressed air to remove dust.
Hints and Tips
The following table contains various hints and tips to get the best performance from your
monitor. If you require additional assistance:
For UK, please call our UK Call Centre on 0344 561 1234.
•
For Ireland, please call our Ireland Call Center on 1 890 818 575.
•
Problem
No image on screen
Out of Focus
Solution
• Check if the power button has been switched on.
• Verify the brightness and contrast of the monitor is within the
normal setting.
• Check if the power indicator is turns on. If so, this indicates
that the monitor is not recieving the input signal.
• If the signal indicator is a notebook or laptop, make sure that
the signal has been switched to screen mode.
• Make sure that the computer is turned on and is not sleeping.
• Make sure that the correct input is selected.
• Check if the image signal cable is inserted properly.
19
Advertisement
Table of Contents
