Troubleshootings; Cleaning And Maintenance - JVC 24WCF Operating Instructions Manual

Symptom
No power
No image
Abnormal colors
The image bounces or a wave
pattern is present.
Switch off and unplug the monitor from the mains socket before cleaning.
Wipe the housing with a soft damp cloth.
Wipe any dust off the screen periodically with a soft, clean and dry cloth. Do not use any fluid as
this may damage the screen.
Do not immerse the monitor in water or any other liquid.
Never use any abrasive or chemical detergents.

TROUBLESHOOTINGS

Make sure the power cord is connected properly.
●
●
●
Please adjust the RGB color.
Remove any electrical device or appliance that may
cause interference.

CLEANING AND MAINTENANCE

Make sure the power cord is connected properly.
Make sure the signal cable is securely connected.
When LED light indicates red, this monitor is in
STANDBY mode. Please move your personal mouse
to see if the image resumes.
EN-17
Remedy