Davis Instruments Energy EnviroMonitor User Manual page 31

Using the Energy EnviroMonitor
6. To display the average daily wind chill heating degree-days during the period, press
HEAT'G D-DAYS again.
The average daily wind chill heating degree-days appear on the right of the
display. The base threshold setting appears on the left of the display.
A
VERAGE
7. To display the threshold, press HEAT'G D-DAYS again.
The threshold appears on the right of the display.
8. To display the date on which the current period started and the number of days in the
period, press HEAT'G D-DAYS again.
The date on which the period started appears on the right of the display. The
number of days in the period appears on the left of the display. To view a typical
period information display, see the "Period Information" illustration on page 20.
9. To display the status of the AutoClear function for daily heating degree-days and daily
wind chill heating degree days (On/Off), press HEAT'G D-DAYS again.
If the AutoClear function is enabled, the word On appears on the right of the
display. If the AutoClear function is disabled, the word OFF appears on the
right of the display. (See "Enabling/Disabling AutoClear" on page 50.)
10. Continuing to press HEAT'G D-DAYS will cycle through all the heating degree-days dis-
plays in a continuous loop.
Page 24
D W C H
AILY IND HILL EATING
H D
EATING EGREE
D D D
EGREE- AYS URING
- T
DAYS HRESHOLD
P
ERIOD
Energy EnviroMonitor Manual