Davis Instruments Energy EnviroMonitor User Manual page 10

• Sensor Tilting Bracket
Enables you to adjust the position of the solar radiation sensor to match
the angle of the sun's rays for maximum readings.
• Radiation Shield
Protects the temperature sensor or temperature/humidity sensor from
solar radiation and other sources of radiated and reflected heat.
Increases the life of the sensor and the accuracy of the readings.
• Rain Collector Shelf
Provides a horizontal surface for mounting the rain collector. May be
used with Sensor Mounting Arm or mounted on other surfaces.
• Shelters
We have a pair of weather-resistant shelters which will enable you to
mount some or all of your system components outside. Optional heaters
enable you to keep components operating even in cold weather.
• Solar Power Kit
Powers the weather station using energy from the sun; no AC power is
required. Requires our 6.5-Amp-Hour Battery or other battery of your
choice.
• Alarm Output Module
Enables you to use weather station alarms to automatically start or stop
external devices such as irrigation systems, heaters, or fans.
• Surge Protectors
For upgraded protection against lightning-induced power surges,
power-cross conditions, and ground potential rises, use Surge Protec-
tors. Use one Surge Protector for every two wires and mount inside one
of our surge-protector shelters.
Energy EnviroMonitor Manual
Optional Accessories
Page 3