Davis Instruments Complete System Shelter Install Manual page 8

3. Bend each bare wire into a U-shape and secure each one under a screw head on
the terminal block as shown below.
It does not matter which wire goes to each screw as long as only one wire
goes to each screw.
4. Secure the cable to the heater assembly by placing the " cable clamp over the
cable and securing it to the heater assembly as shown below.
Page 8
A
TTACHING CABLES TO
S C H
ECURING ABLE TO
T B
ERMINAL LOCK
A
EATER SSEMBLY
Heater