Davis Instruments Complete System Shelter Install Manual page 5

I
NSTALLING THE
Follow the instructions below to install the insulation blankets and the heater
in the appropriate shelter.
Installing in the Complete System Shelter
1. Remove the panel from the back of the CSS.
Consult your CSS manual for instructions.
2. Crease and fold the CSS insulation blankets as shown below.
Make sure the adhesive strips on the blanket are on the back of the blanket
(the side not shown below).
3. Try inserting the blankets into the CSS to make sure they fit. Adjust the folding
as necessary to make them fit.
4. Once you are sure the blankets will fit, remove the backing from the adhesive
strips on the insulation blankets and secure the blankets in the CSS.
Make sure the blankets do not cover the four screw holes in the corner of the
CSS.
Installing the Insulation Blankets and Heater
I
NSULATION
C F CSS I
REASE AND OLD
I B
NSTALLING LANKET INTO
B
LANKETS AND
B
NSULATION LANKETS
CSS
H
EATER
Page 5