Download
Share
Print this page
Gear4music BDK STARTER KIT Setup Manual
  1. Manuals
  2. Brands
  3. Gear4music Manuals
  4. Drums
  5. BDK STARTER KIT
  6. Setup manual

Gear4music BDK STARTER KIT Setup Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
BDK STARTER KIT
SET UP GUIDE

Advertisement

loading

Related Manuals for Gear4music BDK STARTER KIT

Summary of Contents for Gear4music BDK STARTER KIT

  • Page 1 BDK STARTER KIT SET UP GUIDE...

  • Page 2: Contents Checklist

    DRUM HEADS: 1x Snare Drum (13” x 5”) 1x Batter Head for 10” Tom Tom Drum (with Gear4music logo) 1x Tom Tom Drum (10” x 8”) 1x Resonant Head for 10” Tom Tom Drum 1x Floor Tom Drum (14” x 14”) (no logo) 1x Bass Drum (20”...
  • Page 3 2. Place the batter head (without the Gear4music when viewed by an audience. logo) onto the drum and place 1x bass drum 7.
  • Page 4 1x Resonant Head for 10” Tom Tom Drum (no logo) 1x Drum Key 1. Take 1x Tom Tom Drum (10”x 8”) and place on the floor with the Gear4music logo on the side of the drum facing upright. 2. Using the drum key, undo the 2 tension rods from the drum lugs.
  • Page 5 3x holes on the side of the floor tom drum. Tighten the wing nuts to secure the legs in place. When you put the drum upright on to the legs, the Gear4music badge on the side of the drum should be straight. SNARE DRUM ASSEMBLY ITEMS REQUIRED: 1x Snare Drum (13”...
  • Page 6 HI-HAT ASSEMBLY ITEMS REQUIRED: 1x Hi-Hat Stand (three parts) 1x Hi-Hat Cymbals (Pair, 12” – top and bottom) 1x Drum Key 1. Take the tripod base of the hi-hat stand and 5. Take the hi-hat clutch and unscrew the nut at spread the legs out by unscrewing the wingnut.
  • Page 7 CRASH CYMBAL BOOM ARM ASSEMBLY ITEMS REQUIRED: 1x Crash Cymbal (14”) 1x Crash Cymbal Boom Arm 1. The cymbal stand is already assembled and only requires height and leg adjustments. These can be made by undoing the wing nuts, splaying the legs, and then undoing both telescopic poles to set to the desired height.
  • Page 8 FITTING TOM TOM DRUM & CRASH CYMBAL BOOM ARM TO THE BASS DRUM ITEMS REQUIRED: 1x Tom Tom Drum (10” x 8”) 1x Bass Drum (20” x 14”) 1x Crash Cymbal Boom Arm 2x Tom Tom Drum Arms 1. Take the tom drum arm and crash boom arm and place them into the holes on top of the bass drum.
  • Page 9 However, please feel free to refer to the images on our website for some suggestions. For more information and guidance on tuning your drum kit, please visit our website at www.gear4music.com...
  • Page 10 If you have any more questions about this product, please do not hesitate to contact the Gear4music Customer Service Team on: +44 (0) 330 365 4444 or info@gear4music.com...