Download Print this page

Gear4music JUNIOR 3 PIECE DRUM KIT Setup Manual

Download this manual

JUNIOR 3 PIECE

DRUM KIT

SETUP GUIDE

Page 1 JUNIOR 3 PIECE DRUM KIT SETUP GUIDE...
Page 2 JUNIOR 3 PIECE DRUM KIT...
Page 3: Contents Checklist
1x – 16” x 11” Bass Drum (with Drum Hoops attached loosely) 1x – 10” Crash Cymbal DRUM HEADS: 2x – 16” Bass Drum Heads (one with Gear4music logo, one without) HARDWARE: 1x Drum Stool 1x Drum Stool Stand 1x Bass Drum Pedal and Beater...
Page 4 YOUR DRUM KIT Thank you for purchasing the Junior 3 Piece Drum Kit by Gear4music. Bass Drum To help you assemble this instrument, please read Tension Rods, this manual carefully. Claws and Washers Your kit will arrive in a single box and should only take around 20 minutes to assemble.
Page 5 Repeat this process for hole facing up. the other drum skin. 2. Take the bass drum head with the Gear4music 5. Insert the 2x bass drum legs into the holes on logo on it and place it over the drum.
Page 6 TOM DRUM ASSEMBLY Your tom tom drum will arrive already set up and just needs mounting to your bass drum. Insert the longest tube of the tom tom arm into the tom mounting hole on the bass drum. If you are right-handed have this drum to the right-hand side, reverse this if you are left-handed.
Page 7 For more information and guidance on tuning your drum kit, please visit our website at www.gear4music.com. If you have any more questions about this product, please do not hesitate to contact the Gear4music Customer Service Team on: +44 (0) 330 365 4444 or info@gear4music.com...