DRUM MODULE BOX CONTENTS CHECKLIST X1 Drum Module Your kit will arrive in one box and should take around 30 minutes to fully assemble. Please check that all the items below are present before assembly and follow the instructions carefully. CYMBAL PAD BOX X1 Cymbal Pad for Hi-Hat X1 Cymbal Pad for Ride...
Page 3
ATTACH THE PARTS ATTACH THE PADS 1. Loosen wing nut on the holder clamp, which is on the left and right side arm. 2. Insert the Snare Lmetal rod into the holder clamp on the left side arm, then insert the Tom &...
DRUM MODULE ATTACH THE DRUM MODULE 1. Loosen wing nut on the center pipe clamp. 2. Insert the L-metal rod into the clamp. 3. Place the drum module onto the L-metal rod. 4. Tighten the wing nut on the clamp. CONNECTION PROCEDURE 1.
Page 6
If you have any more questions about this product, please do not hesitate to contact the Gear4music Customer Service Team on: +44 (0) 330 365 4444 or info@gear4music.com...