Table of Contents
Advertisement
CLEANING & CARE
1. Remove the juicing screw and strainer from the juicing bowl. Clean with provided brush.
Note:
•
Immediately clean the juicer after each use. If remaining residue in the juicer dries
up, it can make disassembling and clean-up difficult. The excess build-up can
cause poor performance in future uses.
•
For easy disassembly, place the topset in the sink and run water through from the
top of the topset.
•
Thoroughly dry the bottom of the juicing screw where it connects to the metal
cylinder shaft on the base.
2. Place the juicing bowl under running water and unplug the compression silicone to clean
the pulp spout.
Tips:
Soak the juicing bowl in a solution of warm water with baking soda or little bit of bleach
to clean the excess build-up.
Advertisement
Table of Contents
