Getting Started; Location; Setting Up - BT Internet Radio User Manual

Getting started

6
IMPORTANT
Before you continue, make sure that
your wireless router is powered up
and connected to the Internet. To get
this part of the system working you
must refer to the instructions supplied
with the router.
If you have a wireless laptop available
you can check that the wireless
network is up and working.
Press Back at any time to return to
the previous screen.
If the radio cannot find any wireless
networks, the display will show
Wireless Networks
happens, you will need to refer to the
instructions supplied with your
wireless access point to make sure it is
working correctly.
The name for the access point may
also be referred to as the ESSID.
IMPORTANT
Only connect to an access point you
own or you have agreement to use.
Internet Radio – New Style – Edition 5 – 21.09.06 – 7690

Location

The Internet radio should work anywhere within 100 metres
of the router, but this really depends on the access point
being used.

Setting up

1. Connect the power
Plug the mains power cord into the socket on the back of the
radio marked 7.5V DC and plug the other end into the mains
power wall socket. The display on the front of the radio will
come on and show
few seconds you will see
2. Scan for a wireless network connection
When the display says
The BT Internet Radio will now scan for all available wireless
networks, whilst doing so the display will show
No
Found. If this
When the radio finds your wireless network, it displays the
name for the access point on the screen - this is a name that
was allocated to the access point by the person who set up
the network, for example
It is likely, that your radio will find more than one wireless
access point. If this happens, you can choose which one you
want to connect to. Turn the tuning dial on the radio to see
the name for each access point the radio has found.
Reciva Radio ARM Powered
<Scan for networks>
<Scan for networks>
< My Home Network >
, then after a
.
, press Select.
.
Scanning
.