BT Internet Radio User Manual page 27

1. Keep pressing to get to the radio's top-level menu and then
Back
turn the tuning dial to select
2. Turn the tuning dial to display
The radio will scan for all available UPnP servers.
3. After a successful scan, select your UPnP server by turn the
tuning dial to highlight the one you want (if there is more
than one), then press Select.
4. At this stage, your radio should be listed in 'Windows Media
Connect' and can be viewed from the 'Devices' window; your
radio will be displayed with its MAC address. To verify that the
MAC address listed is your radio, select
radio's menu and then turn the tuning dial until
is displayed and press Select. You can now control
Config
the access for this device on your PC using Windows media
connect by looking in the 'Devices' section and clicking on
'Deny' or 'Allow'.
5. Turn the tuning dial until
press Select.
6. Turn the tuning dial until
your radio's MAC address.
7. The radio will now list the media categories available from the
UPnP server, e.g. Music, Playlists etc. Turn the tuning dial to
select which category you wish to browse (for example
) and press Select.
Music
Internet Radio – New Style – Edition 5 – 21.09.06 – 7690
and press Select.
Media Player
and press Select.
UPNP Servers
Configure
Network
is displayed and
View Config
is displayed to view
MAC Address
It may take a few seconds for the
radio to complete the scan. Before
the scan has completed, the radio will
display [Empty]. The radio will
continue to display
UPnP servers are found.
on your
Using the Media Player
if no
[Empty]
27