Installing The Multipurpose Blade Or Dough Blade - KitchenAid 5KFP0719 Instructions Manual

USING THE FOOD PROCESSOR
NOTE: For ease of assembly, install the desired blade or disc before attaching
the work bowl cover.
To attach the work bowl cover, push
3
the lid hinge into the handle hinge on
the work bowl and close the cover.

INSTALLING THE MULTIPURPOSE BLADE OR DOUGH BLADE

Place the blade on the drive adapter.
1
Rotate the blade so it falls down to
the base of the adapter.
W11186024A_01_EN_v09.indd 13
Once the work bowl cover is closed,
4
push the lid hinge down into the
locked position.
NOTE: Your Food Processor will not
operate unless the work bowl cover is
fully closed and the work bowl is properly
seated on the base.
Install the work bowl cover, making
2
sure the lid latch is pushed down to
the locked position.
USING THE FOOD PROCESSOR | 13
4/16/18 4:09 PM