Warranty - RUSTA NARVIK 906512320101 Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

USING THE LOG EFFECT STOVE
1.
Plug in the electric stove at the mains power supply.
2.
To turn on the electric stove, press the fan switch located on the front of the electric
stove underneath a cover. The switch will also turn on the fan.
3.
Operate the flame effect by pressing the flame effect switch.
4.
Select the desired heat output by pressing the relevant heat setting switch: To
operate the electric fireplace on a low heat setting (900 W), press the heat setting I
switch; press it again to switch it off. Press the heat setting II switch to operate the
electric fireplace on a high heat setting (1800 W); press it again to switch it off.
5.
The adjustable thermostat can be used to regulate the temperature. Turn it in a
clockwise direction to increase the heat output. To reduce it, turn the adjustable
thermostat in an anticlockwise direction.
6.
Use the flame brightness dial to control the brilliance of the flame effect. Turn it in a
clockwise direction to increase the intensity. To reduce it, turn the flame brightness
dial in an anticlockwise direction.
7.
Turn off the electric stove by pressing the fan switch.
Note: The electric stove must be turned on using the fan switch before any of the heat
settings will work.
The higher heat setting (1800 W) will only operate if both heat setting switches are
turned on.
CLEANING
• Turn off the fireplace and pull the plug out of the electrical outlet.
• Clean the ventilation openings with a feather duster or vacuum cleaner.
• The surface of the fireplace is cleaned with a damp cloth or feather duster. Do not use
any corrosive cleaners, sprays or other materials which can damage the surface.

WARRANTY

• The warranty is valid 1 year from the date of purchase. A machine-printed receipt
must be presented if there is a complaint.
• The warranty does not cover the replacement of the glass panel, legs, handle or lamps.
• The warranty is voided if the fireplace has been incorrectly connected or if the heater
has been manipulated or modified in any way, if the fireplace has been connected to
an inappropriate outlet, or if it has been used outdoors or in a commercial setting.
• The fireplace is only intended for household use. The fireplace is not intended to be
used as a primary source of heat.
5

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NARVIK 906512320101 and is the answer not in the manual?

This manual is also suitable for:

Narvik 906512330101

Table of Contents