Advertisement
Table of Contents
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Gunson 77115
Summary of Contents for Gunson 77115
- Page 1 Maintenance Battery Charger Part No. 77115 This maintenance battery charger is a fully automatic, microprocessor controlled unit delivering a maximum charge rate of 2 amps. It is suitable for 6 or 12 volt batteries with capacities between 10AH to 80AH.
- Page 2 The 77115 is suitable for regular (sealed or unsealed) Lead Acid batteries and for AGM (absorbed glass mat) batteries used on motorcycles, cars and light commercial vehicles.
- Page 3 The amber LED will flash indication the charger is in standby mode. As the battery stabilises the amber LED will stop flashing and remain lit. This indicates that the battery is charging. If the red LED (abnormal) starts flashing when the AC mains supply is switched on, this indicates that the polarity of the connectors has been reversed (ie, the positive (red) clip has been accidentally connected to the negative terminal | post of the battery).
- Page 4 SAFETY NOTES: • When working with or near a lead-acid battery make sure there is another person close enough to come to your aid if necessary. • If battery acid contacts skin or clothing, wash immediately with soap and plenty of water. •...
Need help?
Do you have a question about the 77115 and is the answer not in the manual?
Questions and answers