For charging motorcycle batteries and trickle charging car/van batteries. (2 pages)
Summary of Contents for Gunson 77117
Page 1
Automatic Battery Charger Part No. 77117 This battery charger is a fully automatic, microprocessor controlled unit delivering a maximum charge rate of 10 amps. It is suitable for 12 volt batteries with capacities between 2AH to 200AH. Instructions...
Page 2
It features short-circuit protection, overload current protection, over voltage protection and over temperature protection. The 77117 is suitable for regular (sealed or unsealed) Lead Acid batteries, and AGM (absorbed glass mat) batteries used on motorcycles, cars and light commercial vehicles. It is also suitable for charging Deep Cycle batteries (e.g.
Page 3
As the battery stabilises the red LED will light. This indicates that the battery is charging. If the red LED (abnormal) starts flashing when the AC mains supply is switched on, this indicates that the polarity of the connectors has been reversed (ie, the positive (red) clip has been accidentally connected to the negative terminal | post of the battery).
Page 4
SAFETY NOTES: • When working with or near a lead-acid battery make sure there is another person close enough to come to your aid if necessary. • If battery acid contacts skin or clothing, wash immediately with soap and plenty of water. •...
Need help?
Do you have a question about the 77117 and is the answer not in the manual?
Questions and answers