Advertisement
METHOD OF USE
Before using the fan, please make sure the product is intact, use the same
power supply and voltage as mentioned on the rating label at back side of the
product. Once the product is plugged in, the buzzer will beep once, the LED
display will display in a few seconds later, and the fan would have entered into
standby position.
Mosquito
Ionizer
Mist
Repellent
1.
Ambient temperature will be displayed when powered on
2. Switch on:
When the fan is stationary, press the "On/Off" button, the buzzer will beep twice,
and the fan will start working in last wind speed. You can then choose the speed
mode either by pressing the speed button on the control panel or on the remote
controller.
3. Wind speed adjustment
After switching on the fan, if you want to change the air flow volume, you can
lightly press the "Speed" button on the control panel of Function Zone to adjust
air fan speed. You can choose from Low, Middle and High. The display screen
will show the selected speed – Low, Middle and High.
4. Wind mode adjustment
While the fan is working, lightly press the "Wind Mode" button to set different
wind mode, it can be set to the mode of Normal, Natural or Sleep circulation
setting. The display screen on Function Zone will show the relative wind mode
logo. The wind mode sets as "Normal" mode by default.
Swing
3
Wind
Timer
Speed
On / Off
Mode
Advertisement
