Method Of Use - Gemini GMF80B Manual

METHOD OF USE

1. Before using the fan, please make sure the product is intact, use the same
power supply and voltage as mentioned on the rating label at back side of the
product. Once the product is plugged in, the buzzer will beep once, the LED
display will display in a few seconds later, the power indicator will also light up
and the fan would have entered into standby position.
NORMAL
NATURAL
SLEEPING
Mosquito
Ionizer
Repellent
2. Switch on:
When the fan is stationary, press the "On/Off" button, the buzzer will beep twice,
and the fan will start working in last wind speed. You can then choose the speed
mode either by pressing the speed button on the control panel or on the remote
controller.
3. Wind speed adjustment
After switching on the fan, if you want to change the air flow volume, you can
lightly press the "Speed" button on the control panel of Function Zone to adjust
air fan speed. You can choose from Low, Medium and High. The relative wind
circulation can be set from the control operation on Function Zone panel. 1
means Low, 2 means Medium, 3 means High. The display screen will show the
selected speed – 1, 2 or 3.
4. Wind mode adjustment
While the fan is working, lightly press the "Wind Mode" button to set different
wind mode, it can be set to the mode of Normal, Natural or Sleeping circulation
setting. The display screen on Function Zone will show the relative wind mode
logo. The wind mode sets as "Normal" mode by default.
TIMER
h
Swing
Mist Timer
3
MOSQUITO
REPELLENT
ION
MIST
SPEED
Wind
Speed
Mode
On / Off