HP f650x User Manual page 29

Table of Contents

3.5 Parking Mode

To monitor the vehicle when it is parked, you can activate Park Recording,

or Motion and Collision Detection, or Timelapse.

Before you activate Parking Mode, please install ACC cable through

professional car service shop.

Follow the steps below to change the settings for Parking Mode:

Press the

press the

Press the

Recording / Motion and Collision Detection / Timelapse/ Off), and

then press the

Press the

Note: ACC cable is not included in the package. Please ask for more information from your

distributor.

3.5.1 Park Recording

- In normal recording, press and hold POWER key for 3 seconds, the

screen will show message "Press OK key to power off or enter

Park Recording after 10 sec." Please wait for 10 seconds and the

camcorder will enter Park Recording automatically. The

camcorder will turn off the screen temporarily, but still in

recording status. Once the collision or vibration is detected, it will

automatically trigger emergency recording.

- To disable this function, press any key to wake up the screen, and

press again any key to resume to normal loop recording.

Note:

1. The video file taken in this mode is same as normal loop recording mode. It will be saved in the

"Video" folder. And the emergency file will be saved in the "Emergency" folder.

2. The file size is according to Record Interval setting.

button to enter the OSD menu.

button to select Parking Mode, and then

button for entering function menu.

button to configure Parking Mode (Park

button to complete setting.

button to return recording screen.

Table of Contents