5.3
Connecting power supply
The connection is performed using integrated power cord.
The device must be operated by qualified personnel. Make sure that the power grid supply parameters are
consistent with device parameters and limitations are not exceeded.
CAUTION!
In the case of cable damage do not attempt to repair. Replacement or repair can be made only
on the manufacturer or by a person with appropriate permissions.
6
OPERATION MANUAL
6.1
Control panel
The control panel is equipped with4-digit displayand4control buttons with the following functions:
1.
MODE – enter to main menu
2.
UP – choose option, edit parameter
3.
DOWN – choose option, edit parameter
4.
ENTER – confirm changes
6.2
Menu
Menudiagram:
www.flash-butrym.pl
7CH mode- Set DMX address
Remote control- Switch on
Macro mode 1- Set speed
Macro mode 2- Set speed
Macro mode 3- Set speed
Sound mode
Red dimmer
Green dimmer
Blue dimmer
White dimmer
Strobe mode- Set speed
4