LED PAR56 7x10W 4in1 RGBW+ RE F7100312
4
INSTALLATION
After removing the packaging, check if the device was not damaged during transport. Before connecting to
the mains, make sure that the device is securely mounted. The manufacturer is not responsible for damage
caused by unstable mounting.
Ensure proper connection to the mains and proper grounding. Make sure that the electrical parameters are
consistent with device requirements. All activities, including connecting the device to the mains must be
performed by qualified personnel.
5
CONNECTIONS
The device is equipped with the following interfaces:
1.
DMX (in/out): XLR 3-pin socket
2.
Power in: integrated power cord
5.1
Connecting DMX signal
The connection is performed using cable with XLR-female -> XLR-Maleplugs.
5.2
Voltagespecification
Input Voltage
110~220V
3
Total Power
70W
Frequency
50/60Hz
www.flash-butrym.pl