Introduction; Safety Information; Product Information; Specification - Flash LED PAR 56 7x10 4in1 RGBW+ RE User Manual

1

INTRODUCTION

Thank you for purchasing LED PAR 56 7x10 4in1 RGBW+ RE. For safety reasons and to ensure the trouble-
free operation, carefully read the instructions.
2

SAFETY INFORMATION

1. Installation should be done by qualified personnel in order to minimize the risk of
accidental electric shock
2. Disconnect the power supply before installation.
3. Before connecting the unit to the mains, make sure it is not damaged mechanically.If you
notice any signs of damage you should contact your dealer immediately.Do not connect the
device to the mains.
4. Do not use the device in high humidity conditions and at temperatures above40° C
5. The device must be installed on stable structures
3

PRODUCT INFORMATION

3.1

Specification


Power supply voltage: 110 - 220V

Voltage frequency: 50/60Hz

Diode type: 4in1

Number of diodes: 7

Diode power: 10W

Display: LED - 4 characters

Color: RGBW

Dimming: Linear: 0 - 100%

DMX standard: DMX 512

Control interface: 4 buttons

Operating modes: Auto, DMX, Sound control

AC IN: integrated power cord

DMX IN: XLR - 3 pin

DMX OUT: XLR - 3 pin:

Housing made: ABS

Cooling: Active

Height [cm]: 17,5

Width [cm]: 17,5

Depth [cm]: 9,5

Weight [kg]: 0,6

Weight with packaging [kg]: 1

Set includes: wireless remote
www.flash-butrym.pl
2