Advertisement
ADJUSTING THE LIGHT DIRECTION
The light head can be tilted vertically up to 30° down or 90° up. To adjust the light direction, loosen the side locking knob (Part 6). Adjust the light head to the
desired position, and retighten the knob.
ON/OFF SWITCH
The light head is equipped with an ON/OFF switch (Part 4) located on the back side of the light. Press the switch once to turn the light on, and press the
switch a second time to turn it off. Always turn the light off before unplugging.
MAINTENANCE
Your light requires very little care and maintenance. Simply clean the lens regularly with a non-abrasive cleaner. Use similar care for the stand and tripod.
WARNING: Always make sure the work light is unplugged and completely cool before attempting to clean it.
Do not dispose of electrical appliances as unsorted municipal waste; use separate collection facilities. Contact your local government for information
regarding the collection systems available. If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the
groundwater and get into the food chain, damaging your health and well-being.
1,000-LUMEN LED WORKLIGHT
ONE YEAR
This product is backed by a Limited One Year Warranty. This warranty covers
manufacturer defects and workmanship. The warranty excludes misuse or abuse and
normal wear and tear. Exclusion is not allowed in some states and may not apply.
This warranty gives you specific legal rights, and you may have other rights, which
vary from state to state.
CALIFORNIA PROPOSITION 65 WARNING: This product contains chemicals known to
the State of California to cause cancer, birth defects, or other reproductive harm.
SAVE YOUR RECEIPTS
THIS WARRANTY IS VOID WITHOUT THEM
|
JS PRODUCTS
6445 MONTESSOURI STREET
800.255.7011 | FAX: 775.898.8773 | FOR MORE PRODUCTS AND ACCESSORIES GO TO PROTOCOLEQUIPMENT.COM
OPERATION
LIMITED
WARRANTY
|
LAS VEGAS, NV 89113
Page 4
Advertisement
