Related Manuals for Illuminator 67124
Summary of Contents for Illuminator 67124
- Page 1 2,500-LUMEN LED WORKLIGHT 67124 OPERATOR’S MANUAL CAUTION: To Reduce The Risk Of Injury, User Must Read And Understand Operator’s Manual. Save These Instructions For Future Reference.
-
Page 2: Table Of Contents
TABLE OF CONTENTS General Safety Information..............................Page 1 Work Area Safety.................................. Page 1 Electrical Safety..................................Page 1 Personal Safety..................................Page 1 Power Tool Use and Care..............................Page 2 Service....................................Page 2 Important Safety Instructions............................... Page 2 Specifications..................................Page 3 Assembly Instruction................................Page 3 Operation Instructions................................ -
Page 3: Power Tool Use And Care
PERSONAL SAFETY d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. -
Page 4: Specifications
IMPORTANT SAFETY INSTRUCTIONS • Do not use a pressure washer to clean this product. • Do not modify the work light in any way. Unauthorized modification may impair the function and/or safety and could affect the life of the product. There are specific applications for which the work light was designed. -
Page 5: Warranty
ASSEMBLY INSTRUCTION ATTACHING LIGHT PANEL 1. Attach metal frame of the light panel to the top of the tripod and secure with the knob (F). ADJUSTING LIGHT’S PITCH ANGLE (Fig.3) 1. Loosen knobs (J) to adjust pitch of light panels. 2.