Part Identification; Important Safety Information; Electrical Specifications - Danby DPAC9009 Owner's Use And Care Manual

Danby dpac9009: user guide

Hide thumbs Also See for DPAC9009:

Specification sheet (1 page)

Owner's manual (13 pages)

Table of Contents

Available languages

Air Exhaust

LCD

Display

Front

Panel

IMPORTANT SAFETY INFORMATION

READ ALL SAFETY INFORMATION BEFORE USING

ELECTRICAL

SPECIFICATIONS

1) Check available power supply and

resolve any wiring problems BEFORE

installation and operation of this unit. All

wiring must comply with local and national

electrical codes and be installed by a

qualified electrician. If you have any

questions regarding the following

instructions, contact a qualified electrician.

2) This appliance draws 10 nameplate amps

under Cooling Mode and may be used in

any properly wired, general purpose 13 amp

household grounded receptacle.

3) For your safety and protection, this unit is

grounded through the power cord plug when

plugged into a matching wall outlet. If you

are not sure whether the wall outlets in your

home are properly grounded, please consult

a qualified electrician.

WARNING: Improper connection of the

grounding plug can result in risk of Fire,

Electric Shock, and/or injury to Persons

associated with the appliance. Check with a

qualified service representative if in doubt

that the appliance is proplery grounded.

4) DO NOT USE PLUG ADAPTERS OR

EXTENSION CORDS WITH THIS UNIT. If it

is necessary to use an extension cord with

this unit, use an approved "air conditioner"

extension cord only (available at most local

hardware stores).

5) To avoid the possibility of personal injury,

always disconnect the power supply to the

unit before installing and/or servicing.