Page 1
CONSERVER CES INSTRUCTIONS POUR CONSULTATION ULTÉRIEURE: En cas de revente du déshumidificateur, ce manuel doit être inclus avec l’appareil. Danby Products Ltd, PO Box 1778, Guelph, Ontario Canada N1H 6Z9 Danby Products Inc, PO Box 669, Findlay, Ohio USA 45839-0669...
TABLE OF CONTENTS UNIT SPECIFICATIONS PART IDENTIFICATION IMPORTANT SAFETY INFORMATION Electrical Specifications Energy Saving Tips INSTALLATION Window Kit Installation OPERATION Features of the Control Panel Air Conditioning ........7 Dehumidifier .
Thank you for choosing a Danby appliance to provide you and your family with all of the “Home Comfort” requirements of your home, cottage, or office. This Owner’s Use and Care Guide will provide you with valuable information necessary for the proper care and maintenance of your new appliance. If properly maintained, your Danby appliance will give you many years of trouble free operation.
4) DO NOT USE PLUG ADAPTERS OR EXTENSION CORDS WITH THIS UNIT. If it is necessary to use an extension cord with this unit, use an approved “air conditioner” extension cord only (available at most local hardware stores). 5) To avoid the possibility of personal injury, always disconnect the power supply to the unit before installing and/or servicing.
(on some products this is also indicated by a light on the plug head). ENERGY- Your Danby appliance is designed to be highly efficient in energy savings. Follow these recommendations for greater efficiency. SAVING TIPS 1) Select a thermostat setting that suits your comfort needs and leave at that chosen setting.
ELECTRIC SHOCK HAZARD: To avoid the possibility of personal INSTALLATION injury, disconnect power to the unit before installing or servicing. Flexible Exhaust Hose (13cm) & Exhaust nozzle connector (2 pcs)... from 17 up to 53 ” (135cm) Flexible Exhaust Hose (11cm) & Exhaust nozzle connector (2pcs)...from 15 to 51 ”...
OPERATION- Features of the Control Panel Warning Light KEY PAD FUNCTIONS POWER SWITCH:Turns unit ON/OFF MODE: Allows you to scroll through and select desired operating mode. FAN: Select from three different fan settings; High, Medium, and Low. AUTO-TIMER AUTO-TIMER Adjust: Auto off- With machine in running mode, press timer button to set timer control.
OPERATING INSTRUCTIONS IMPORTANT: The exhaust hose must be properly vented (outdoors) during air conditioning mode. CONDITIONING 1) Press the POWER SWITCH key (Fig. A) to switch on the unit, and the previous set temperature will be shown in the temperature display area of the control panel.
OPERATING INSTRUCTIONS (cont’d) DEHUMIDIFIER Note: During dehumidifier mode, the exhaust hose does not have to be vented outdoors. 1) Press the ON/OFF key pad to switch the unit on (Fig. G) 2) Press the MODE key (Fig. H) until the DRY indicator illuminates on the control panel (Fig.I).Each press of the MODE key will advance to a different mode setting (Cool-Dehumidifier-Fan-Heat-Auto).
OPERATING INSTRUCTIONS (cont’d) The AUTO-TIMER feature offers a unique selection of multiple AUTO-TIMER choice, fully automatic on and/or off (start/stop) programs between 1-24 hours under any one mode of your Home Comfort unit. The programs are as follows: a) Auto-Off: Pre-select a time that will turn off the unit automatically (between 1-12hrs). b) Auto-On: Pre-select a time that will turn on the unit automatically (between 1-12hrs).
CARE AND MAINTENANCE CLEANING THE UNIT CAUTION: Before cleaning or servicing this unit, disconnect from any electrical supply outlet. 1) DO NOT use gasoline, benzene, thinner, or any other chemicals to clean this unit, as these substances may cause damage to the finish and deformation of plastic parts. 2) Never attempt to clean the unit by pouring water directly over any of the surface areas, as this will cause deterioration of electrical components and wiring insulation.
TROUBLESHOOTING PROBLEM • Unit does not work • Power is out • The plug is not plugged in properly • The full-tank indicator is ON; tank is full • Current leaking or pressing test button on LCDI plug • Unit suddenly stops •...
Page 13
TA B L E D E S M AT I ÉRES SPÉCIFICATIONS DE L’UNITÉ IDENTIFICATION DE PARTIE CONSIGNES DE SÉCURITÉ IMPORTANT Spécifications Électrique Suggestions pour économiseur d'énergie INSTALLATION ........17 Installation de kit de fenêtre UTILISATION Dispositifs du panneau de commande...
Merci d’avoir choisi un appareil Danby qui vous fournira ainsi qu’à votre famille, le confort au foyer, à la maison, au chalet ou au bureau. Ce manuel d’utilisation vous offre des renseignements pratiques pour le soin et l’entretien de votre nouvel appareil. Un appareil Danby bien entretenu vous fournira plusieurs années de service sans ennui.
IDENTIFICATION DE PARTIE Échappement d’air Affichage Panneau Frontal Roues CONSIGNES DE SÉCURITÉ IMPORTANT LISEZ TOUTE L'INFORMATION DE SÉCURITÉ AVANT UTILISATION SPÉCIFICATIONS ÉLECTRIQUES 1) Vérifier l’alimentation de courant disponible et résoudre tout problème AVANT l’installation et l’usage de cette unité. Le câblage doit être conforme aux codes local et national de l’électricité...
Page 16
à l’air conditionné. (Sur certains produits, ceci sera aussi indiqué par une lumière sur la tête de la fiche). Votre appareil ménager Danby est conçu pour l’efficacité en SUGGESTIONS économie de l’énergie. Pour le rendement maximal, observer les POUR L’ÉCONOMIE DE recommandations qui suivent.
RISQUE DE CHOC ÉLECTRIQUE: Pour éviter la possibilité de blessures INSTALLATION corporelles, débrancher l’alimentation de courant à l’unité avant d’entreprendre l’installation ou le service. Tuyay d’echappement flexible (13cm) & bec connecteur d’échappement (2 mcx)... de 17 (45cm) jusqu’à 53 ” (135cm) Tuyay d’echappement flexible (11cm) &...
Page 18
FONCTIONNEMENT - Caractéristique du panneau de commande Lampe témoin FONCTIONS DE BLOC NUMÉRIQUE INTERRUPTEUR D’ALIMENTATION: Permet de mettre l’appareil en Marche/Arrêt MODE: Vous permet fair défiler et de sélectionner le mode de fonctionnement désiré VENTILATEUR: Sélectionnez à partir de trois réglages de ventilateur différent;...
FONCTIONNEMENT REMARQUE: Le tuyau flexible pour l’échappement d’air doivent être installés pour le fonctionnement en mode de CLIMATISEUR climatisation 1) Appuyer sur la touche INTERRUPTEUR (Fig. A) pour activer l’unité et le réglage précédent du température sera montrée dans l’affichage de la température sur le panneau de commande.
Page 20
FONCTIONNEMENT (suite) DÉSHUMIDIFICATEUR REMARQUE: L’installation du tuyau flexible pour l’echappement d’air n’est pas requise pour le fonctionnement en mode de Déshumidification. 1) Appuyer sur la touche INTERRUPTEUR pour activer l’unité (Fig. G). 2) Appuyer sur la touche MODE (Fig. H) jusqu’à l’affichage du symbole Déshumidification sur le panneau de commande (Fig.
FONCTIONNEMENT (suite) La caractéristique de la MINUTERIE AUTOMATIQUE offre une sélection MINUTERIE unique de plusieurs choix, entièrement automatique et/ou programmes AUTOMATIQUE d'arrêt (démarrage/arrêt) entre 1 à 12 heures dans tous les modes de votre Unité de confort à la maison. Les programmes sont comme suit: a) Arrêt automatique : Sélectionnez une heure à...
SOINS ET ENTRETIEN NETTOYAGE DE L'UNITÉ MISE EN GARDE: Avant de nettoyer ou de faire le service sur cette unité, il est recommandé de débrancher le cordon d’alimentation de la prise de courant électrique. 1) NE PAS utliser d’essence, de benzène, de diluant ou tous autres produits chimiques pour nettoyer cette unité.
PROBLEME • L'unité ne fonctionne pas • Il n'y a pas d'alimentation • La fiche n'est pas branchée adéquatement • L'indicateur du réservoir plein est en MARCHE; le réservoir est plein • Fuite actuelle ou appuie sur le bouton de test de la fiche LCDI •...
Page 24
1-800-26- (1-800-263-2629) vous recommendera un centre régional. Danby Products Ltd, PO Box 1778, Guelph, Ontario Canada N1H 6Z9 Danby Products Inc, PO Box 669, Findlay, Ohio USA 45839-0669 Printed in China (P.R.C.) Model • Modèledelo DPAC9009...