Video cassette recorder all k30-mecha hi-fi / mono (112 pages)
Summary of Contents for Daewoo DVK-87N
Page 1
Video Cassette Recorder User’s Guide D V K - 8 7 N ® As an NERGY Partner, DAEWOO has ® determined that this product meets the NERGY guidelines for energy efficiency.
Overloaded AC outlets, extension cords, frayed power cords, damaged or cracked wire insulation, and broken plugs are dangerous. They may result in a shock or fire harzard. Periodically examine the cord, and if its appearance indicates damage or deteriorated insulation, Daewoo Video Cassette Recorder User’s Guide Safety information, continued...
22 Heat-The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat. iii. Daewoo Video Cassette Recorder User’s Guide Contents Overview of the equipment ... 1 Front panel ...1 Front panel display...2...
Pause Forward Search STOP Stop Rewind SP/EP Tape Speed SCH- Reverse Search EJCT Eject HIFI Hi-Fi TimerRecording R0:30,R1:00 OTR (One Touch Recording) *When the lighted indicator is blinking on the display panel, the VCR is in the child lock mode.
Attach an antenna or cable system at this terminal. RF OUT Use this terminal to connect to a VHF/UHF antenna or to your television RF input. Daewoo Video Cassette Recorder User’s Guide Overview of the equipment, ANT. IN RF OUT • Objects between the...
To get a replacement remote, please call1-800-DAEWOO8(1-800-323-9668) to get a replacement remote and talk to parts department. Daewoo Video Cassette Recorder User’s Guide Overview of the equipment, • Do not mix different types of batteries, or mix an old and a new battery.
Press the cable from the combiner onto the ANT. IN terminal on the back of your VCR. Daewoo Video Cassette Recorder User’s Guide Connecting your VCR, continued • If your antenna system has two sets of twin 300-ohm leads, purchase a combiner (available at electronics stores).
Connecting your VCR, continued Connect a pair of audio cables to the AUDIO OUT terminal on the back of the VCR. If you have a mono (non-stereo) TV, connect only the white (left) terminal. Connect the other end of the audio cables to the AUDIO IN terminals on the TV.
Page 9
Setting up your VCR Once you have connected your VCR and put batteries in the remote control, you are ready to use the VCR. Before you start, however, you must be certain to do the following: • Turn on the television.
- -/- -/- - CLEAR Correct MENU Cancel Use 0-9 to enter the month, day, and year. The VCR will automatically adds the correct day of the week according to the date that is selected. Daewoo Video Cassette Recorder User’s Guide Setting up your VCR, Daewoo Video Cassette Recorder User’s Guide...
Page 11
Press –CH/TRK+ to view the memorized channels. Removing channels manually To erase a channel manually, Press MENU to display the menu. Press 3 to select Channel Set. Daewoo Video Cassette Recorder User’s Guide Setting up your VCR, continued Press 2 to select Add/Remove Channels. ADD/REMOVE CHANNELS Channel 06 is now ADDED.
MENU Save Press CLEAR on the remote to correct setup status. Press MENU when you are finished. Press MENU to exit the menu system. Daewoo Video Cassette Recorder User’s Guide Setting up your VCR, continued Selecting output channel(CH3 or CH4) you must set output channel for your VCR choosing either CH3 or CH4.
If the video cassette has no safety tab(e.g., a rented video cassette), the VCR will automatically play the tape once you insert it. If the VCR does not play the video cassette, press PLAY. Searching forward while viewing a video cassette To search forward on a video cassette, press FF.
The Digital Auto Tracking System automatically adjusts the tracking to obtain the best possible picture. To manually adjust the tracking during playback, press –CH/TRK+. Daewoo Video Cassette Recorder User’s Guide Recording programs You have three options for recording TV programs: Manual, Timer, and One touch recording.
Use 0-9 to enter the channel number to record. If the VCR is in cable While the VCR is in the CABLE mode, if a channel box setup mode, the preset over 100 is desired, press 100’s key and then the channel number will be displayed automatically.
Press 1 to select Timer Recordings. TIMER RECORDINGS 1 Make a New Program 2 Review/Cancel Programs MENU Exit Daewoo Video Cassette Recorder User’s Guide Recording programs, 3 0 A M 3 0 A M 01 Sat Be certain when using...
Press 4 to choose Functions Press 2 to switch between ON and OFF - Select ON if you want the VCR to switch to the VCR mode when the VCR is turned on or a casssette is inserted. This only applies if you connect the ANT.IN and RF OUT jacks of your VCR and TV and watch your VCR on channel 3 or 4 of your TV.
Using advanced features, continued - Select OFF if you want the VCR to remain in the TV mode. This is useful if you watch your VCR on the TV’s video input and you don’t want your antenna/cable signal interrupted by the VCR.
In the Autumn, daylight-saving time ends on the last Sunday in automatically adjust for daylight-saving time. October. Select OFF if you do not want the VCR’s clock to The VCR clock automatically adjust for daylight-saving time. changes from 2:00 AM to 1:00 AM (back one hour).
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT OPEN REFER SERVICING TO QUALIFIED SERVICE PRESONNEL. NO USER SERVICEABLE PARTS INSIDE. DO NOT REMOVE COVER (OR BACK). AUDIO VIDEO INPUT Daewoo Video Cassette Recorder User’s Guide Glossary ANT. IN AUDIO RF OUT VIDEO AUDIO VIDEO Daewoo Video Cassette Recorder User’s Guide...
Troubleshooting Your Daewoo VCR is designed to give you trouble-free performance for many years. If you have a problem with your VCR, try the solutions listed below. If the suggestions listed below do not solve your problem, contract your Daewoo dealer or an authorized Daewoo service center.
Daewoo Video Cassette Recorder User’s Guide Warranty Daewoo Electronics Corporation of America warrants each new electronic product manufactured by it to be free from defective material and workmanship and agrees to remedy any such defect or to furnish a new part (at the Company’s option) in exchange for any part of any unit of its manufacture which under normal...
Need help?
Do you have a question about the DVK-87N and is the answer not in the manual?
Questions and answers