USB
Chipset:
-
1 x USB 3.1 Gen 2 Type-A ports (red) on the back panel
-
1 x USB Type-C
-
6 x USB 3.1 Gen 1 ports (4 ports on the back panel, 2 ports available through
the internal USB header)
Internal
1 x 24-pin ATX main power connector
Connectors
1 x 4-pin ATX 12V power connector
1 x M.2 Socket 3 connector
4 x SATA 6Gb/s connectors
2 x SATA Detection Headers (SATA_SGP1/2)
1 x SATA power connector
1 x CPU fan header
2 x system fan headers
1 x front panel header
1 x front panel audio header
1 x USB 3.1 Gen 1 header
1 x S/PDIF Out header
1 x Trusted Platform Module (TPM) header (2x6 pin, for the GC-TPM2.0_S
module only)
1 x serial port header
1 x speaker header
1 x Clear CMOS jumper
1 x chassis intrusion header
Back Panel
1 x D-Sub port
Connectors
1 x HDMI port
1 x DisplayPort
1 x USB 3.1 Gen 2 Type-A port (red)
1 x USB Type-C
4 x USB 3.1 Gen 1 ports
2 x RJ-45 ports
2 x audio jacks
I/O Controller
iTE
I/O Controller Chip
®
Hardware
Voltage detection
Monitor
Temperature detection
Fan speed detection
Overheating warning
Fan fail warning
Fan speed control
* Whether the fan speed control function is supported will depend on the cooler you
BIOS
1 x 128 Mbit flash
Use of licensed AMI UEFI BIOS
PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
port on the back panel, with USB 3.1 Gen 2 support
™
port, with USB 3.1 Gen 2 support
™
install.
- 7 -