Osd Menu Operations - JVC LT-50N530Z User Manual

OSD Menu Operations

EPG stands for Digital Electronic Program Guide. It is supplied by the program providers and offers
information about the programs to be broadcast. Y ou can access it in digital mode by pressing the EPG
button on the remote control.
1.Press the EPG button to bring up the EPG interface (below).
The second bar from the top will display the current date and time. On the list below, the channel you are
currently watching will be highlighted.
2.Before you can view any EPG information, you have to 'activate' every channel for which you want to view program information. To do this,
use the / buttons to select a channel, then press [ ENTER ] to confirm.
3.To check programs to be broadcast on a different date, use the Yellow/Blue button to select the date, the program on the previous/next day
will be displayed.
4.Go to the channel and use the
information. After a brief moment, the program information will appear on the second bar.
5.Use the buttons to enter the time list, and use the
6.To exit out of the EPG menu, press the EXIT button.
Press the RED button to switch to PVR mode. Here, you can set the time to record your chosen program.
Press the GREEN button to set a reminder for a particular program.
Press the YELLOW button to set the previous day's information.
Press the BLUE button to set the next day's information.
/ buttons to select the channel for which you want to view
/ buttons to scroll through the time slots.
14