Dual Color - ViewSonic VP2785-2K User Manual

Dual Color

The monitor comes with a dual color engine to display two different color settings
in PIP (Picture-in-Picture) or PBP mode. You can set different color presets in both
windows (Main Window and Secondary Window).
NOTE: To enable PIP or PBP mode, refer to the "Multi-Picture" section on page
53.
To configure Dual Color:
1. Press the 1/2/3/4 key to display the Quick Menu. Then press the 4 key to display
the OSD Menu.
2. Press the 1 or 2 key to select the Setup Menu menu. Then press the 3 key to
enter the menu.
3. Press the 1 or 2 key to select Multi-Picture. Then press the 3 key to enter its sub-
menu.
4. Press the 1 or 2 key to select Dual Color. Then press the 3 key to enter its sub-
menu.
5. Press the 1 or 2 key to select the desired color setting. Then press the 3 key to
confirm.
Main Window
VP2785-2K
Input Audio Adjust ViewMode
Select
Multi-Picture PBP Left-Right
ECO Mode
DisplayPort Dual Color
MST
DDC/CI
Save As
All Recall
Secondary Window
Manual Image
Color Adjust Setup Menu
Adjust
Off
Adobe RGB
sRGB
PIP
EBU
SMPTE-C
REC709
DICOM SIM
D50
CAL 1
CAL 2
CAL 3
Native
2560 x 1440 @ 60Hz
57