Advertisement
3.1.
PERFORMANCE SPECIFICATIONS
CHART 1.
Rated line pull
Gear ratio
Motor
Gear train
Clutch
Braking action
Fairlead
Wire rope
Drum size
Dimensions
Bolt pattern
Net weight
LINE PULL AND LINE SPEED vary according to how much cable is on the drum. The winch is rated at the first layer of cable on the
drum. The maximum line pull force will be reduced by subsequent layers of cable on the drum. Chart 2 illustrates the maximum line
force at increasing cable layers.
CHART 2.
Layer of cable
1
2
3
4
CHART 3.
Line pull
Line speed
Motor current
4. INSTALLATION
4.1.
WINCH INSTALLATION
4.1.1.
The winch needs to be mounted onto a steel mounting using the 4 point foot mounting system, in either a horizontal or vertical plane.
4.1.2.
The winch needs to be mounted on a flat surface so that the three sections (motor, cable drum and gear housing) are properly aligned.
4.1.3.
Before installation ensure the mounting position being used is capable of withstanding the winch weight and the rated capacity.
4.1.4.
Use the dimensions in fig.4 to manufacture a steel mounting plate, a minimum of 6mm thick. Fasteners should be high tensile steel,
grade 5 or better. A poorly designed mount may invalidate the warranty.
4.1.5.
The winch should be secured to the mounting with grade 8.8 M12 bolts and spring washers, see fig.5.
Fig 5
© Jack Sealey Limited
RW5675.V2
5675kg/12500lbs
171:1
DC12.6V:6.4hp/4.7kW
4 stage gear driven
Pull and turn
Automatic in the ratchet wheel
4-way roller fairlead
9.2mm x 26m (3/8" x 85.3')
63mm x 222mm (2.48" x 8.74")
606mm x 172mm x 250mm (23.86" x 6.77" x 9.84")
254mm x 114.3mm (10" x 4.5")
254 x 165.1mm (10" x 6.5")
41kg (90.2lb)
Rated line pull/layer (kg/lbs
5675/12500
4522/9961
3759/8280
3216/7084
Ibs
0
6000
Kg
0
2722
(12V)FPM
45.9
7.2
(12V)FPM
14.0
2.2
(12V)Amps
50
260
Cable capacity per layer (m/ft)
5.4/17.7
12.2/40.0
19.8/65.0
26/85.3
8000
9500
12500
3629
4313
5675
5.6
3.9
3.0
1.7
1.2
0.9
310
360
390
Original Language Version
Fig 6
RW5675.V2
Issue:2(S) 02/05/18
Advertisement
