Advertisement
chart 1.
Single line rated pull
Gear reduction ratio
Motor
(Series wound)
overall dimensions
drum size
Cable length
net weight
line Pull and line sPeed vary according to how much cable is on the drum. The winch is rated at the first layer of cable on the drum. The
maximum line pull force will be reduced by subsequent layers of cable on the drum. Chart 2 illustrates the maximum line force at increasing
cable layers.
chart 2.
chart 3.
4. installation
4.1.
winch installation
4.1.1.
The winch needs to be mounted onto a steel mounting using the 4 point foot mounting system, in either a horizontal or vertical plane.
4.1.2.
The winch needs to be mounted on a flat surface so that the three sections (motor, cable drum and gear housing) are properly aligned.
4.1.3.
Before installation ensure the mounting position being used is capable of withstanding the winch weight and the rated capacity.
4.1.4.
Use the dimensions in fig.4 to manufacture a steel mounting plate, a minimum of 6mm thick. Fasteners should be high tensile steel,
grade 5 or better. A poorly designed mount may invalidate the warranty.
4.1.5.
The winch should be secured to the mounting with grade 8.8 M12 bolts and spring washers, see fig.5.
fig.5
© Jack Sealey limited
8180kg
516.1
2.3kw
3.1hp
642x215x288mm
Ø88x224mm
Ø13mmx25m
78.0kg
Original Language Version
fig.6
RW8180 Issue 3 27/04/18
Advertisement
