Advertisement
NOTE: Whilst mounting orientation is at your discretion, the winch is to be operated with the wire rope in an under wound orientation
on the drum. The winch is designed to rope out and rope in, in one direction. DO NOT attempt to reverse the operation of the winch.
WARNING! DO NOT weld or machine any part of the winch, this will weaken it and void the warranty.
WARNING! Batteries contain explosive gases. The following precautions should be taken before making battery connections: wear eye
protection; remove all jewellery; follow the wiring diagram included in the installation instructions; keep spectators away. In the event of a
battery explosion, acid should be washed away as soon as possible, seek medical help immediately.
WARNING! Use of any other accessories or attachments other than those recommended in this instruction manual may result in personal
injury or property damage and could void the warranty.
NOTE: The safety precautions and instructions discussed in this manual can't cover all possible conditions and situations that may occur.
It must be understood by the operator that common sense and caution are factors which cannot be built into this product but must be
applied by the operator.
2. INTRODUCTION
An all metal chassis for long life and low maintenance, suitable for industrial recovery and off-road use. Motor can easily be rotated 90° to meet
various wiring and mounting requirements. A 6.4hp high power 4.7kw 12V DC motor with a permanent magnet gives first class pulling power.
Innovative 'Double Lock' load holding brake design provides zero drag when pulling in. Ergonomic 'lift and turn' free spool clutch. Four stage
planetary gears. High quality wire rope feeds through 4-way roller fairlead for even distribution of cable onto drum. Heavy duty all-weather housing
and IP67 rated motor and gearbox.
3. SPECIFICATION
Model no: ............................................................... RW5675.V2
Weight: ..............................................................................41kg
Current draw: ................................. No load - 50A, Load - 390A
Gear ratio: ........................................................................171:1
Line pull*: .......................................................5675kg (12500lb)
Line speed*: ......No load - 15mtr/min, maximum load 1mtr/min
Motor power: ...................................................... 4.7kW (6.4hp)
Supply: ............................................................................... 12V
Wire rope length: ............................................................. 26mtr
Wire rope Ø: ...................................................................9.2mm
Note *: Performance quoted at first layer of cable on drum.
© Jack Sealey Limited
Fig.2
Fig.1
Original Language Version
Fig.3
Fig.4
RW5675.V2
Issue:2(S) 02/05/18
Advertisement
