Help And Advice; Technical Information - BT Paragon 200 User Manual

Outside guarantee
If your Paragon 200 needs repair after the
guarantee period has ended, call the Paragon
Helpline on
If you have to return your Paragon 200
Pack the unit securely, preferably in the original
packaging. All parts must be returned including
the mains power adaptor. We cannot take
responsibility for goods damaged in transit.
Emergency calls
The emergency services can be contacted in the
UK by dialling
country that is a member of the European
community.
No dialling tone
Check that your machine is connected to the
phone socket.
Display does not come on
Check that your machine is correctly connected to
the mains power and that the power is switched
on.
Is the answering machine switched to ANSWER
OFF? Press Answer On/Off.
Check that the mains power cable is plugged in
to the back of the machine.
Outgoing message does not record
Speak clearly – within 20cm of the microphone –
when recording your message.
20
.
or which is valid in any
Incoming message does not record
Check that your machine is set to ANSWER ON
and that the recording capacity is not full.
The caller may be speaking too quietly or has a
bad connection.
Cannot access your machine from another
phone
Make sure the phone you are calling from has a
keypad.
TouchTone TM
When entering your security PIN, allow enough
time - at least 2 seconds between each digit for
your Paragon 200 to recognise each one.
To reset
If your Paragon 200 will not respond to any
button presses, remove the back-up battery and
turn off the power for 10 seconds. Turning the
power back on will reset your machine to
ANSWER ON mode. However, please note that
during resetting, all messages will be lost.
RTTE
This product is intended to be connected to
analogue networks in the United Kingdom.
This equipment complies with the essential
requirements for the Radio Equipment and
Telecommunications Terminal Equipment
Directive 1999/5/EC.
If you still have problems with your
Paragon 200, call the Paragon Helpline on