To Use Caller Return (Auto 1471); Using Remote Access - BT Paragon 200 User Manual

During playback:
Vol
Adjust the loudspeaker volume.
The level is shown at the bottom of
the display.
Caller Return automatically dials 1471 after a
caller has left a message on your answering
machine and records the announcement giving
the telephone number (if available) and the time
of the call. So even if a caller chooses not to
leave a message, you may still have their
telephone number recorded.
Press and release until the display
Sel
shows 1471.
OK
Switches between ON and OFF.
Prompt will confirm the setting
OK
displayed.
While the Caller Return setting is
switched ON, the display shows 1471.
You can let your Paragon 200 answer a
call and have the loudspeaker switched
on so you can hear the caller. This
gives you the option of picking up the
handset and speaking to them or letting
them leave a message.
While the Paragon 200 is answering
a call or while idle.
Vol
Adjust the loudspeaker volume.
The level is shown at the bottom of
the display.
You can switch on your answering machine from
another phone and, providing you are using a
TouchTone TM keypad, play back your messages
and memos.
The pre-set code is 0000.
15