LG F1258FD Owner's Manual page 18

H ow to use washer
Each cycle has preset settings that are selected
automatically. You may also customize the
settings using the cycle setting buttons. Press the
button for that setting until the indicator light
forthe desired value is lit.
The washer automatically adjusts the water level
for the type and size of wash load for best results
and maximum efficiency. It may seem there is no
water inside the drum in some cycles, but this is
normal.
NOTE: To protect your garments, not every
WASH, RINSE, SPIN, TEMP. or option is
available with every cycle. See the Cycle Guide
for details.
WASH
Use it to select the desired washing.
❶ SOAK: For washing the dirty laundry, use this
washing after the 60-minute soaking.
❷ PRE WASH: In case of the extremely dirty
laundry, this wahsing removes the pollutedwater
by washing for 10 minutes before the main
washing.
❸ MAIN WASH:It is the washing type for the
general one.
❹ SMALL QUANTITY:Use it for the small laundry.
❺ TIME SAVE: Use it for the short-time wahsing.
RINSE
Use it to change the number of
rinsings
18
CYCLE SETTING BUTTONS
TEMP.
Selects the wash temperature
combination for the selected cycle.
Press the TEMP. button until the
indicator light for the desired setting is
lit.
• Your washer features a heating element to boost
the hot water temperature for Extra Hot settings.
This provides improved wash performance at
normal water heater settings.
• Select the water temperature suitable for the type
of load you are washing. Follow the fabric care
label for best results.
SPIN
The washer drum spins at up to
1,200 RPM. This reduces drying time
and saves energy. Press the SPIN
button until the indicator light for the
desired setting is lit. Some fabrics, such as
delicates, require a slower spin speed.
The Drain & Spin cycle:The Spin button also
activates the Drain & Spin cycle to drain the tub
and spin clothes; for example, if you want to
remove clothes before the cycle has ended.
To activate the DRAIN & SPIN cycle:
❶ Press the ON/OFF button to turn on the
washer.
❷ Press the SPIN button.
❸ Select the desired spin speed.
NOTE: If NO SPIN is selected, the washer will
drain only.
❹ Press the START/PAUSE button.