IMPORTANT NOTES IMPORTANT NOTES: ALWAYS FOLLOW THE MANUFACTURERS INSTRUCTIONS. READ ALL INSTRUCTIONS CAREFULLY BEFORE ASSEMBLY AND USE OF THIS STROLLER. THE CORRECT USE AND MAINTENANCE OF THIS PRODUCT IS ESSENTIAL. • USE GREAT CARE WHEN USING THE STROLLER ON STAIRS, ESCALATORS, TRAVELATORS OR OTHER MOVING SURFACES.
Page 3
WARNINGS WARNINGS: TO AVOID INJURY OR DEATH: ALWAYS APPLY THE BRAKES WHENEVER THE STROLLER IS STATIONARY. • DO NOT LEAVE CHILDREN UNATTENDED. • SECURE THE CHILD IN THE HARNESS AT ALL TIMES. • DO NOT CARRY EXTRA CHILDREN OR BAGS ON THIS STROLLER. •...
MANUAL HANDLING TECHNIQUES SMART lifting technique This technique can be used to pick up small light loads from low levels. Size up the Load • Assess the load (size, shape and weight). • Assess whether the load needs to be moved; •...
1. OPENING THE STROLLER IMPORTANT NOTES: PLEASE REFER TO PAGE 4 FOR SMART LIFTING TECHNIQUES. • RELEASE THE STORAGE LATCH WITH DUE CARE AND OPEN THE FRAME. • WHEN OPENING THE STROLLER, BE AWARE OF THE DANGER OF BEING INJURED BY MOVING PARTS AND LOCKING DEVICES DURING THE PROCESS.
Page 8
1. OPENING THE STROLLER Open the frame as shown by the arrows until you hear a ‘click’ which indicates the frame is fully opened and locked. Squeeze in and hold the buttons on the inside of the handle and rotate the handle completely up.
Page 9
2. ASSEMBLING AND REMOVING THE FRONT SWIVEL WHEELS Take each front swivel wheel assembly and push it into each of the front leg mouldings until you here a ‘click’ which indicates the wheel is locked in. Pull on the wheel assembly to confirm it is securely assembled.
Page 10
3. ASSEMBLING AND REMOVING THE REAR WHEELS Metal Latch 4. USING THE FRONT SWIVEL WHEELS PLEASE NOTE: Always lock the swivel wheels when using the stroller on rough surfaces as this will minimise wheel wobble. The swivel wheels should only be locked when the wheels are in the trailing position (wheels under frame).
5. ATTACHING THE STROLLER SEAT TO THE STROLLER FRAME IN THE FORWARD FACING POSITION IMPORTANT NOTE: THE SEAT SUPPORT BAR ON THE UNDERNEATH OF THE SEAT UNIT MUST BE SECURED BEFORE ATTACHING THE SEAT UNIT TO THE STROLLER FRAME. To secure the seat support bar, raise the seat support bar into the upright position and lift the large fabric flap and place it over the seat support bar and secure with the hook and loop.
Page 12
5. ATTACHING THE STROLLER SEAT TO THE STROLLER FRAME IN THE FORWARD FACING POSITION IMPORTANT NOTE: ALWAYS REMOVE YOUR CHILD FROM THE STROLLER SEAT BEFORE INSTALLING, REMOVING OR CHANGING THE SEAT DIRECTION. Hold the stroller seat over the frame and align the stroller seat mouldings on both sides over the frame connection sockets in the middle of the frame.
Page 13
5. ATTACHING THE STROLLER SEAT TO THE STROLLER FRAME IN THE FORWARD FACING POSITION CAUTION CAUTION click www.babylove.com.au...
Page 14
6. REMOVING THE STROLLER SEAT FROM THE STROLLER FRAME IMPORTANT NOTE: ALWAYS REMOVE YOUR CHILD FROM THE STROLLER SEAT BEFORE INSTALLING, REMOVING OR CHANGING THE SEAT DIRECTION. Press in and hold the red quick release button on both sides of the stroller seat mouldings and lift the stroller seat out of the frame connection sockets.
Page 15
7. ATTACHING THE STROLLER SEAT TO THE STROLLER FRAME IN THE REARWARD FACING POSITION IMPORTANT NOTE: ALWAYS REMOVE YOUR CHILD FROM THE STROLLER SEAT BEFORE INSTALLING, REMOVING OR CHANGING THE SEAT DIRECTION. Hold the stroller seat over the frame and align the stroller seat mouldings on both sides over the frame connection sockets in the middle of the frame.
Page 16
7. ATTACHING THE STROLLER SEAT TO THE STROLLER FRAME IN THE REARWARD FACING POSITION CAUTION click CAUTION www.babylove.com.au...
Page 17
8. ATTACHING AND USING THE CANOPY IMPORTANT NOTE: The sun is very strong. DO NOT LEAVE YOUR CHILD EXPOSED TO THE SUN. The canopy or hood on this product will not give your child total protection from the harmful rays of the sun. To attach the canopy, slide the canopy mouldings (as indicated by arrow) into the frame mouldings until they lock together.
Page 18
8. ATTACHING AND USING THE CANOPY To increase the canopy length, open the zipper to access extra canopy section. Zipper To use the peek a boo window, lift the canopy window flap up. To remove the canopy, slide the canopy mouldings (as indicated by arrow) out of the frame mouldings.
Page 19
9. ATTACHING AND REMOVING THE ARM BAR WARNING: WHEN A CHILD IS IN THE STROLLER KEEP THE ARM BAR ATTACHED TO THE ADAPTORS AT ALL TIMES. Align the arm bar pins with the frame mouldings on both sides of the stroller seat and insert until you hear a ‘click’.
Page 20
10. FITTING THE REVERSIBLE INSERT AND SHOULDER PADS IMPORTANT NOTE: ENSURE THAT THE SHOULDER STRAPS ARE FITTED THROUGH THE APPROPRIATE HARNESS SLOTS TO SUIT YOUR CHILD’S SEATED SHOULDER HEIGHT. Place the insert on the stroller seat and thread the harness shoulder straps through the corresponding slots in the seat insert.
11. ADJUSTING THE BACKREST WARNINGS: • THE UPRIGHT POSITIONS ARE NOT SUITABLE FOR USE WITH CHILDREN LESS THAN 6 MONTHS OLD. • THE LOWEST RECLINE POSITION SHOULD BE USED TO TRANSPORT BABIES. THE BACKREST CAN BE ADJUSTED TO A MORE UPRIGHT POSITION AS THE CHILD GROWS OLDER AND IS ABLE TO SUPPORT ITS HEAD WITHOUT ASSISTANCE.
Page 22
11. ADJUSTING THE BACKREST To raise the backrest, grasp the plastic rings fixed to the adjuster straps and with the other hand push the backrest up to the desired position. To lower the backrest, support the backrest with one hand and with the other hand pull down the on the backrest adjuster button and lower the backrest to the desired position.
12. USING THE BRAKES WARNING: ALWAYS APPLY THE BRAKES WHEN THE STROLLER IS STATIONARY. To lock the rear wheels, press the brake pedal down. Check that the brakes have locked by trying to push the stroller forward. If not locked, repeat this step.
13. ADJUSTING THE LEG SUPPORT To adjust the leg rest, press the release buttons in on both sides of the leg rest and raise or lower to your desired position. 14. ADJUSTING THE PIVOTAL HANDLE PLEASE NOTE: There are three handle height positions. To adjust the handle height, squeeze in and hold the buttons on the inside of the handle.
Page 25
15. SECURING YOUR CHILD IN THE HARNESS WARNING: USE THE HARNESS AT ALL TIMES. • ENSURE YOUR CHILD IS SECURED WITH A CORRECTLY ADJUSTED HARNESS. • THE ADJUSTED HARNESS SHOULD CLOSELY FIT THE CHILD. • NEVER LEAVE THE HARNESS BUCKLED WHEN NOT FITTED TO A CHILD IN THE STROLLER, BECAUSE THE HARNESS CAN FORM LOOPS WHICH MAY POSE A STRANGULATION HAZARD.
Page 26
15. SECURING YOUR CHILD IN THE HARNESS Shoulder straps Buckle housing Waist Waist strap strap Crotch strap Position the shoulder strap tongue on the top of the waist buckle tongue on both sides. Shoulder strap Shoulder strap Buckle housing Waist Waist strap strap...
Page 27
15. SECURING YOUR CHILD IN THE HARNESS 3 bar slider 3 bar slider Waist strap 3 bar slider Crotch strap Tighten or loosen crotch straps by sliding the 3 bar sliders up or down. 4 bar slider Tighten or loosen the waist straps, hold and lift the 4 bar slider and then pull the harness strap to adjust to the desired fit.
Page 28
15. SECURING YOUR CHILD IN THE HARNESS Tighten or loosen the shoulder straps, slide the 3 bar slider up or down to adjust to the desired fit. Always adjust the harness strap when changing the seating position of the child. To release the buckle, squeeze the top and buckle tongues together with enough pressure so the buckle tongues can release from the buckle housing.
Page 29
15. SECURING YOUR CHILD IN THE HARNESS The stroller seat has 3 sets of harness slots at different heights to accommodate the child. To change the shoulder harness height, push the shoulder harness tongue out of the current harness slot and through the back of the seat.
16. USING THE TETHER STRAP WARNINGS: USE THE TETHER STRAP TO STOP THE STROLLER ROLLING AWAY. • THE STROLLER IS DESIGNED FOR USE ON FLAT OR GENTLY SLOPING SURFACES, AND MAY BE UNSTABLE ON HIGHER SLOPING AND UNEVEN SURFACES AND USERS SHOULD BE AWARE OF THE POSSIBILITY OF THE STROLLER ROLLING AWAY OR TIPPING OVER.
17. USING THE STROLLER PLEASE REFER TO PAGE 4 FOR LIFTING TECHNIQUES. • Always ensure you bend your knees where appropriate and take due care when lifting the frame. • With your hand through the wrist tether strap loop, push the stroller holding the handle.
18. FOLDING THE STROLLER IMPORTANT NOTES: PLEASE REFER TO PAGE 4 FOR LIFTING TECHNIQUES. • REMOVE THE CHILD FROM THE STROLLER BEFORE COMMENCING ANY FOLDING OPERATION. • FOLD THE STROLLER SLOWLY AND BE CAREFUL WHERE YOU PLACE YOUR HANDS. • WHEN FOLDING THE STROLLER, BE AWARE OF THE DANGER OF BEING INJURED BY MOVING PARTS AND LOCKING DEVICES DURING THE PROCESS.
Page 33
18. FOLDING THE STROLLER Squeeze in and hold the buttons on the inside of the handle (1). Rotate the handle completely down against the backrest then release the buttons. Press the folding lever down and push the handle down towards the rear wheels.
Page 34
19. LIFTING AND CARRYING THE STROLLER www.babylove.com.au...
Page 35
20. INFANT CARRIER WARNINGS AND IMPORTANT NOTES (Infant Carrier sold separately) WARNINGS: • IT IS UNSAFE TO USE ACCESSORIES NOT APPROVED FOR USE WITH THIS STROLLER. • DO NOT USE ANY ACCESSORIES OTHER THAN THOSE APPROVED FOR USE WITH THIS STROLLER BY NURSERY ELEGANCE. •...
Page 36
20. INFANT CARRIER WARNINGS AND IMPORTANT NOTES (Infant Carrier sold separately) IMPORTANT NOTES: • THE SUN IS VERY STRONG. DO NOT LEAVE YOUR CHILD EXPOSED TO THE SUN. THE CANOPY OR HOOD ON THIS PRODUCT WILL NOT GIVE YOUR CHILD TOTAL PROTECTION FROM THE HARMFUL RAYS OF THE SUN.
Page 37
21. ATTACHING THE INFANT CARRIER TO THE STROLLER FRAME (Infant Carrier sold separately) IMPORTANT NOTES: • THE SUN IS VERY STRONG. DO NOT LEAVE YOUR CHILD EXPOSED TO THE SUN. THE CANOPY OR HOOD ON THIS PRODUCT WILL NOT GIVE YOUR CHILD TOTAL PROTECTION FROM THE HARMFUL RAYS OF THE SUN.
Page 38
21. ATTACHING THE INFANT CARRIER TO THE STROLLER FRAME (Infant Carrier sold separately) With the Infant Carrier handle in the upright position, face the feet end of the Infant Carrier towards the stroller handle. Lower the Infant Carrier into the receivers. Press down firmly on both sides. CAUTION click IMPORTANT NOTE:...
Page 39
22. REMOVING THE INFANT CARRIER FROM THE STROLLER FRAME To remove the Infant Carrier from the stroller frame, locate the release latch on the back (head end) of the Infant Carrier. Squeeze up and hold the release latch. Lift the Infant Carrier up by the handle and remove from the stroller.
CARE AND MAINTENANCE • To prolong the life of your stroller keep it clean and do not leave it in the direct sunlight for extended periods of time. • Remove fabric covers and trims may be cleaned using warm water with household soap or mild detergent.
Page 44
Customer Service Ph: 1300 131 477 Email: info@babylove.com.au Distributed by: Nursery Elegance Pty. Ltd. ACN: 122 443 387 6 Thorpe Street, Sunshine, Victoria, 3020, Australia Due to our continuing program of development, Nursery Elegance reserves the right to alter the specifications, colour or design without any further notice.