Advertisement
Quick Links
CLEANING
.
To clean vinyl and metal parts wipe with a clean wet cloth and a mild soap and water
solution.
To clean woven fabric use upholstery cleaner such as normally used on furniture or a
.
mild soap and water solution. Allow fabrics to air dry, out of direct sunlight.
Never clean with abrasive, ammonia based, bleach based or spirit type cleaners.
.
CARE & MAINTENANCE
Check the main components and other parts operate freely and are secure. Check
.
regularly for wear & tear, loose fasteners and damage. Tighten any loose fasteners.
Replace any worn or damaged parts immediately using only Babylove approved parts.
Moving parts may require occasional lubrication with a dry lubricant or a silicon based
.
spray lubricant. This will help avoid squeaks.
Exposure to direct sunlight will fade most fabrics over time. To limit the effect of UV
.
fading, avoid leaving stroller in direct sunlight where practicable.
MODEL VARIATIONS
Not all models will have features such as rain covers, canopy windows, etc.
.
Note that the fabric patterns and colours pictured on the stroller in this instruction
.
manual may vary from that of the product that you have purchased.
Thank you for purchasing this quality Babylove product from our exclusive range of baby products.
We are confident that you will appreciate its many highlights including durability and reliability.
Your new product has been manufactured to comply with the Australian Standard AS/NZS
2088:2000 and comes with a 12 month warranty (receipt required). Please keep this instruction
manual for future reference.
Distributed by Nursery Elegance Pty Ltd
ACN 122 443 387
Unit 10, 339 Williamstown Road Port Melbourne VIC 3207, Australia
PHONE 1300 131 477
WEB: www.babylove.com.au
EMAIL: info@Babylove.com.au
12
MERCURY
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
4800080
Layback Stroller
series SH138
Advertisement
Related Manuals for Baby Love MERCURY
Summary of Contents for Baby Love MERCURY
- Page 1 MERCURY Layback Stroller CLEANING To clean vinyl and metal parts wipe with a clean wet cloth and a mild soap and water solution. To clean woven fabric use upholstery cleaner such as normally used on furniture or a mild soap and water solution. Allow fabrics to air dry, out of direct sunlight.
-
Page 2: Upright Position
14. TO ADJUST THE HANDLE POSITION IMPORTANT: RETAIN FOR FUTURE REFERENCE. NOTE: THE PISTOL GRIP HANDLES ON THE STROLLER READ THESE INSTRUCTIONS CAREFULLY AND KEEP THEM FOR FUTURE REFERENCE. CAN BE ROTATED AROUND TO ANY ONE OF 16 THE CORRECT USE AND MAINTENANCE OF THIS PRODUCT IS ESSENTIAL. DIFFERENT POSITIONS TO SUIT YOUR COMFORT. - Page 3 PARTS LIST 12. TO ADJUST THE SEAT RECLINE 1 - Stroller frame NOTE: THE SEAT HAS 5 RECLINE POSITIONS. 1 - Canopy Press the release buttons on both backrest recline 1 - Holder mechanisms and then lower the seat’s backrest to the desired position.
- Page 4 1. ASSEMBLING THE STROLLER 10. TO OPERATE THE BRAKES NOTE: THE REAR BREAKS ARE DESIGNED TO BE Release the storage latch on the side of the ACTIVATED WITH YOUR FOOT. stroller frame. Pull the frame up until the frame locks at the rear of the Lightly step on the brake lever of the right-side rear frame partly open.
- Page 5 8. TO USE AND ADJUST THE CANOPY 2. TO ATTACH THE REAR WHEELS The canopy is hinged to allow it to open. Gently push Roll the frame forward to lay the frame face down on the front of the canopy forward to open it as desired. the floor.
- Page 6 3. TO ATTACH THE FOOTREST 5. TO LOCK THE FRONT SWIVEL WHEELS Align the footrest as shown over the two holes. To prevent the front wheels from swivelling on uneven Press the pins into the mouldings. Secure on the or rough surfaces, push down on the swivel lock on underside with the caps provided.