Prime Security Prime AMX 58 Owner's Manual page 8

Specific Zone Intrusion Identification — If the alarm had been
n
triggered in your absence, the siren will chirp 3 times upon remote
disarm (Previous Intrusion Alert). When you enter the vehicle and turn
on the ignition, the LED will flash in cycles to specifically identify which
zone has triggered the alarm.
LED
One Flash...One Flash...
Two Flash...Two Flash...
Three Flash...Three Flash...
Automatic Malfunction Override — In the event of a faulty sensor
n
or alarm input trigger zone, the alarm, when remotely armed, will alert
you by a series of chirps and light flashes.
Instant Remote Control Code Deletion — In the event of a lost
n
or stolen remote control, all remote controls can be erased from the
system's memory to prevent unauthorized system operation. See the
"Programming Table for Remote Controls" on page 9.
One-Step Remote Control Code Learning — The system can be
n
programmed to accept as many as four separate remote controls. See the
"Programming Table for Remote Controls" on page 9.
Alarm State Memory — If your vehicle's battery is disconnected and
n
later reconnected, the system will automatically return to its last state
prior to disconnection, whether it was armed, disarmed or in Protected
Valet Mode. For example, if a mechanic disconnects the battery while the
alarm is disarmed or in Protected Valet Mode, he won't trigger the alarm
when he reconnects the battery. If a thief removes power while the alarm
is armed, and reconnects it, the alarm will instantly sound, the parking
lights will flash and the starter will be disabled.
6
AMX58 Owner's Manual
Zone
Impact sensor
Hood trunk trigger
Door trigger