Valet Switch; Protected Valet Mode - Prime Security Prime AMX 38 Owner's Manual

Dei clifford prime amx 38 car alarms: owners manual
Table of Contents

Advertisement

User Programmable Illuminated Exit
The system can be programmed to turn on the interior lights for 30 seconds
after the ignition key has been turned "OFF." Turning the ignition key "ON" or
remotely locking the doors will turn off the interior lights. (See "Programming
Table for System Features" on page 8.)
Remote-Controlled Trunk Release
Press the remote control TRUNK button for 1-2 seconds. The trunk will
unlatch (pop open).
Remote-Controlled Accessories
You can operate up to two remote-controlled accessories such as a remote
engine starter, window roll-up/down, headlight activation, fuel filler door
release or remote garage door opener.
To operate one of the accessories, press the remote control OPTION button
for 1-2 seconds to activate or deactivate the optional accessory.
By pressing the remote control LOCK and UNLOCK buttons simultaneously
for 1-2 seconds, you can operate an additional optional accessory.

Valet Switch

The valet switch is a small hidden toggle switch that allows you to control
many of the system's programmable features and prevents Passive Lock and/or
Passive Starter Disable. In the event of a lost or stolen remote control, you can
use this switch to bypass (shut off) the entire system and add or delete remote
controls. (See the "User-Programmable Features" on page 8).This switch can
only be controlled with the use of your ignition key.
NOTE: Be sure to have your dealer show you where the valet switch is located.

Protected Valet Mode

If the Passive Lock and/or Passive Starter Disable features are turned on, you
should use your valet switch to place your system in Protected Valet Mode
whenever your car is being serviced by mechanics, car wash personnel or
driven by a valet attendant. While in Protected Valet Mode, all system features
are bypassed to prevent unauthorized or accidental activation.
To Turn on Pro tected Valet Mode
1. Turn your ignition key to the "ON" position or start the engine.
2. Flick the valet switch to the "ON" position.
3. The LED will turn on solid red to indicate the system is in Protected Valet
Mode.
4. Turn the ignition key to the "OFF" position.
6
AMX38 Owner's Manual Rev. A - 0499

Advertisement

Table of Contents
loading

This manual is also suitable for:

Amx 38

Table of Contents