Manual Transmission Safestart - Clifford IntelliStart 4 Owner's Manual

manual transmission safestart

N N O O T T E E : : This section is only for vehicles with a manual transmission.
For safety reasons, the transmission must be left in neutral if the engine
will be remotely started. To assure safe remote starting, you must per-
form these steps before exiting:
1. Park and, while the engine is running, place the transmission
in neutral and set the hand brake.
2. Without touching the brake, transmit channel 11 (LevelShift
button twice, then button 3) on the Radar 2 remote or the
button combination on the other remote assigned by your
Authorized Directed Dealer. Two parking light flashes will
confirm this action.
3. Turn the ignition off and remove your keys. The engine will
continue to idle.
4. Exit and arm. The engine will shut down. This prepares the
system to later accept your remote starting command.
N N O O T T E E : : For safety reasons, the system ignores the remote start command if the
alarm sounded while you were away. In addition, you may only remotely start
while the system is armed.
© 2 0 0 5 d i re c t e d e l e c t ro n i c s — a l l r i g h t s re s e r v e d
11