Playing Sound From External Audio Equipment Through The Digital Piano's Speakers; Outputting Digital Piano Notes Through An Amp Or Audio Equipment - Casio Privia PX-S1000 Connection Manual

Playing Sound from External
Audio Equipment Through the
Digital Piano's Speakers
Connection requires commercially available connecting cords,
supplied by you.
• The connecting cords should have a 3-pole stereo mini plug
on one end and a plug that matches the configuration of the
external device on the other end.
• Turn off the external device when making connections.
After connecting, turn down the Digital Piano and
external device volume levels whenever turning power
on or off.
• After connecting, turn on the external device and then
the Digital Piano.
• If external device notes that sound through the Digital
Piano speakers are distorted, lower the external
device's volume level setting.
AUDIO IN jack (Stereo mini jack (3.5mm))
3-pole stereo mini plug
Outputting Digital Piano Notes
Through an Amp or Audio
Equipment
You can connect audio equipment or a music amplifier to the
Digital Piano and then play through external speakers for
more powerful volume and better sound quality.
• Turn off the external device when making connections.
After connecting, turn down the Digital Piano and
external device volume levels whenever turning power
on or off.
• After connecting, turn on the Digital Piano and then the
external device.
• If keyboard notes are distorted when they are sounded
from external audio equipment, lower the Digital
Piano's volume setting.
Portable audio player, etc.
Connection requires commercially available connecting cords,
supplied by you.
Audio amplifier AUX IN jacks, etc.
Pin plugs
RIGHT (Red)
LEFT (White)
■ Connecting to Audio Equipment (Figure
Use commercially available cables to connect the external
audio equipment to the Digital Piano's LINE OUT jacks as

shown in Figure . LINE OUT R jack output is right channel
sound, while LINE OUT L/MONO jack output is left channel
sound. It is up to you to purchase connecting cables like the
ones shown in the illustration for connection of audio
equipment. Normally in this configuration you must set the
audio equipment's input selector to the setting that specifies
the terminal (such as AUX IN) to which the Digital Piano is
connected.
■ Connecting to a Musical Instrument Amplifier

(Figure )
Use commercially available cables to connect the amplifier to
the Digital Piano's LINE OUT jacks as shown in Figure
LINE OUT R jack output is right channel sound, while LINE
OUT L/MONO jack output is left channel sound. Connecting
to the LINE OUT L/MONO jack only outputs a mixture of both
channels. It is up to you to purchase a connecting cable like
the one shown in the illustration for connection of the
amplifier.
LINE OUT jacks
(Standard jack (6.3mm))
Guitar amplifier
Keyboard amplifier, etc.
INPUT 1
INPUT 2

)

EN-3