Quick-Osd-Menu - Siemens SCD 1597-I Operating Instructions Manual

3.2.1

Quick-OSD-Menu

Function(s) of the control keys:
Key Function
• Start Quick-OSD-Menu
<+>
• Increase the parameter value
• Selection of the input signal
• Automatically alignment of the pictures
• Decrease the parameter value
<->
<MEN> • No function in the Quick-OSD
<SET> • Start Quick-OSD-Menu
• Adjust the contrast / brightness
• Zoom and picture in picture characteristics
Following adjustments can be done via the Quick-OSD-menu:
Invoke via key <SET>
Function
Invoke via key <+>
Function
Source select Digital
DVI, analog RGB
LCD-Monitor SCD 1597-I
Adjustment/value
Range: 0 to 100
via key <+/->
Range: 0 to 100
via key <+/->
Adjustment/value
Press key <+> to
select
Press key <+> to
start the adjustment
Page 35 / 41
Description
Contrast adjustment
Brightness adjustment
Description
Selection of input-source
Perform an automatic image
adjustment. Adjustment of frequency,
phase and image position.
Operating Instructions
DOC-No.: B30149DE3.DOC