Advertisement
Item Description
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Components and waste containing asbestos
Components, parts and materials containing refractory
ceramic fibers
Components, parts and materials containing
radioactive substances
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components and
materials requiring selective treatment can be removed.
Tool Description
Description #1 SCREW DRIVER(PHILLIPS HEAD)
Description #2 SCREW DRIVER(PHILLIPS HEAD)
Description #3 SCREW DRIVER(PHILLIPS HEAD)
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment
including the required steps to remove the external enclosure:
1. Remove External Electric Cables Display Head
2. Remove Stand base Display Head
3. Remove Rear cover from Display Head
4. Remove Bracket Assy From Display Head
5. Remove Front cover Assy From Display Head
6. Remove Bracket left&right from Display Head
7. Disassemble Front Cover
8. Disassemble Bracket ASSY
9. Disassemble Stand ASSY
10. Disassemble Panel ASSY
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items contained in the
product that require selective treatment (with descriptions and arrows identifying locations).
EL-MF877-00
Template Revision C
Last revalidation date 09-May-2018
Notes
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
HPI instructions for this template are available at
EL-MF877-01
Quantity of
items
included in
product
0
0
0
0
0
Tool Size (if
applicable)
#0
#1
#2
Page 2
Advertisement
