Advertisement
Quick Links
Product End-of-Life Disassembly Instructions
Product Category: Monitors and Displays
Marketing Name / Model
[List multiple models if applicable.]
HP 27qi Display
HP 27qi 27-inch Display
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
Batteries
Mercury-containing components
Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
External electrical cables and cords
Gas Discharge Lamps
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Components and waste containing asbestos
Components, parts and materials containing
refractory ceramic fibers
EL-MF877-00
Template Revision B
Notes
With a surface greater than 10 sq cm
I/F Board*1, SPS board*1, Control Board*1
All types including standard alkaline and lithium coin
or button style batteries
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
Includes background illuminated displays with gas
discharge lamps Panel*1
0
C605 in SPS Board
HDMI cable*1, Power cord*1
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
PSG instructions for this template are available at
EL-MF877-01
Quantity
of items
included
in product
3
0
0
1
0
0
1
2
0
0
0
0
0
Page 1
Advertisement
Related Manuals for HP 27qi
Summary of Contents for HP 27qi
- Page 1 Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
- Page 2 Components, parts and materials containing radioactive substances 2.0 Tools Required List the type and size of the tools that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed. Tool Description Tool Size (if applicable)
- Page 3 2. Use tool to release screws on monitor, then use tool to separate rear cover from monitor head through tear down slot. 3. Disassemble the lamp wire, LVDS FFC*2 and ctrl-BD FFC from connector, tear the tape*2 from chassis, separate Assy- chassis from monitor head by hand EL-MF877-00 Page 3...
- Page 4 4.Disassemble the lamp wire from panel, and disassemble ctrl-BD from MF by hand. 5. Use tool to release screws*9 on MF, then separate the MF from panel. EL-MF877-00 Page 4 Template Revision B PSG instructions for this template are available at EL-MF877-01...
- Page 5 6. Use tool to release Hexagon screw*2 from SHD, then release screws*7 on the power board and interface board, then disassemble power-BD and interface-BD from the chassis by hand. 7. Disassemble the LVDS*2 by hand. 8. Release Column & base by hand. EL-MF877-00 Page 5 Template Revision B...
- Page 6 9. Use tool to release screw*3 from Column. EL-MF877-00 Page 6 Template Revision B PSG instructions for this template are available at EL-MF877-01...