Necchi NC-102D Instruction Manual page 59

1
2
Pull the buttonhole lever all the way down
and position it behind the bracket on the
buttonhole foot.
Slightly hold the end of the upper thread and
start sewing.
①
Buttonhole lever
②
Bracket
Darning stitches are sewn from the front of
the presser foot to the back, as shown.
Note
If the fabric does not feed, for example,
because it is too thick, increase the stitch
length.
If the sewing range is too big to sew, then we
suggest you can sew several times (or cross
sew) to get better sewing result.
53