Table of Contents
Advertisement
Quick Links
TABLE OF CONTENTS
1 Specifications ----------------------------------------------------- 2
2 Location of Controls and Components ------------------- 3
3 Troubleshooting Guide ----------------------------------------- 5
4 Disassembly and Assembly Instructions ---------------- 6
4.1. Dust box cover assembly removal -------------------- 6
4.2. Separate the upper and lower body units ----------- 6
removal------------------------------------------------------- 7
4.4. Motor removal ---------------------------------------------- 8
4.5. Cord reel partition unit replacement ------------------ 9
4.6. Rail base U replacement -------------------------------10
4.7. Spring-loaded cord reel pre-winding -----------------10
4.8. How to disassemble the turbine nozzle -------------10
5 Wiring Connection Diagram ---------------------------------12
6 Exploded View and Replacement Parts List -----------13
6.1. EXPLODED VIEW (ATTACHMETS)-----------------13
6.2. PARTS LIST (ATTACHMETS)-------------------------14
6.3. EXPLODED VIEW (BODY UNIT) --------------------15
Model No.
Product Color :Metalic blue
Destination
PAGE
6.4. PARTS LIST (BODY UNIT)---------------------------- 16
6.5. PACKING INSTRUCTIONS --------------------------- 17
6.6. PACKING LIST ------------------------------------------- 18
© 2008 Matsushita Electric Industrial Co., Ltd. All
rights reserved. Unauthorized copying and distribu-
tion is a violation of law.
Order No.VCD0802004CE
Vacuum Cleaner
MC-CG487-ZC79
MC-CG487-ZA76
MC-CG487K-ZP47
:Europe
PAGE
Advertisement
Table of Contents
Related Manuals for Panasonic MC-CG487-ZC79
Summary of Contents for Panasonic MC-CG487-ZC79
-
Page 1: Table Of Contents
Order No.VCD0802004CE Vacuum Cleaner MC-CG487-ZC79 Model No. MC-CG487-ZA76 MC-CG487K-ZP47 Product Color :Metalic blue Destination :Europe TABLE OF CONTENTS PAGE PAGE 1 Specifications ----------------------------------------------------- 2 6.4. PARTS LIST (BODY UNIT)---------------------------- 16 2 Location of Controls and Components ------------------- 3 6.5. PACKING INSTRUCTIONS --------------------------- 17 3 Troubleshooting Guide ----------------------------------------- 5 6.6. -
Page 2: Specifications
1 Specifications Model No. MC-CG487 MC-CG487K Power source 230 V~50 Hz 230-240 V~50 Hz Input power (MAX) 2000W 2000W Input power (IEC) 1600W 1500-1600 W Dimensions (WxLxH)mm 280 mm x 425 mm x 260 mm Net weight 5.1kg Extension wand Telescopic Crevice nozzle Dusting brush... -
Page 3: Location Of Controls And Components
2 Location of Controls and Components... -
Page 5: Troubleshooting Guide
3 Troubleshooting Guide CONDITION CHECK POINT METHOD OF INSPECTION TRANSACTION Motor fails to rotate Power supply cord Check power supply cord continu- If there is no continuity, replace the (no noise is heard at all) ity. cord reel patition unit. Fuse Check plug fuse continuity. -
Page 6: Disassembly And Assembly Instructions
4 Disassembly and Assembly Instructions Important notice: Before replacing any components, make sure to turn OFF the vacuum cleaner. Remove the power plug from the outlet. * Caution: 1. Do not attempt to modify the machine, parts, etc. when marking repairs. 2. -
Page 7: Printed Circuit Board Assembly (P.c.b Ass'y) Removal
3. Lift the upper body U to separate it from the lower body U. 3. Disengage the fast-on terminal of the wires (red) and (blue) which lead to the cord reel partition wall connected to the printed circuit board assembly. * Caution: Pull out the fastening terminal without twisting it. -
Page 8: Motor Removal
5. Remove the two screws fixing the P.C.B. holder and pull it out from the lower body U. 5. Lift the motor section from the lower body U. * For removing the printed circuit board assembly, first remove the fast-on terminal for the connecting section for the motor. -
Page 9: Cord Reel Partition Unit Replacement
4.5. Cord reel partition unit replace- 6. Remove all components fitted to the motor. a. Remove the motor case plate. ment b. Remove the motor support rubber (rear). c. Remove the motor support. 1. Increase the gap width between the cord reel and the d. -
Page 10: Rail Base U Replacement
4.6. Rail base U replacement 4.8. How to disassemble the tur- bine nozzle 1. Remove the screw fixing the rail base U onto the cord reel partition U. 4.8.1. Agitator ass'y 2. Remove the rail base U from the cord reel partition U. 1. - Page 11 4.8.3. Turbine complete 1. Pull up the floor nozzle pipe U and remove the turbine complete. (Fig.21)