Page 3
WARNING IMPORTANT SAFETY INSTRUCTIONS READ AND FOLLOW ALL INSTRUCTIONS WARNING - RISK OF ELECTRIC SHOCK - The pump is to be supplied by an isolating transformer or supplied through a residual current device (RCD) having a rated residual operating current not exceeding 30 mA.
Page 4
Safekeeping the instruction. For reconstruction the pool set every time, please always refer to the instructions. - If instruction is missed, please contact with Bestway or search it in website: www.bestwaycorp.com NOTE: This product is not intended for commercial use.
Page 6
P6517/P6(H1)517 P61318 P6680 P6916 PEDESTAL FIXING Fig.1 IEC60335-2-41 TEST standard requires the filter pump must be vertically fixed on ground or a certain pedestal made of wood or concrete before use. There should be two holes 9mm in diameter on the pedestal, the space between which should be 163mm. 2-M8 nut Put filter pump on the pedestal and fix them together by fasten the bolts and nuts.
Page 7
NOTE: It is imperative to check that the hydraulic connectors are not obturated. Operation 1) Open/unscrew the Air Purge Valve (P6112) on the top of the Filter Pump; air is released as water fills the Filter Pump. 2) When water comes out of the Air Purge Valve (P6112) screw it closed and wipe away any water. 3) To start the Filter Pump, insert the plug into a residual current device (RCD).
Page 8
To enact a warranty claim, this form must be completed and submitted with a copy of your purchase receipt to your local Bestway After Sales Center. Please contact your local Bestway After Sales Center before sending any documents. They will provide full instructions of what is needed for your claim. Bestway will ®...