ASROCK Z390M-ITX/ac User Manual page 62

Z390M-ITX/ac
Use this to configure DRAM Voltage. The default value is [Auto].
PCH +1.05 Voltage
Configure the chipset voltage (1.05V).
VCCST Voltage
Configure the voltage for the VCCST.
Save User Default
Type a profile name and press enter to save your settings as user default.
Load User Default
Load previously saved user defaults.
Save User UEFI Setup Profile to Disk
It helps you to save current UEFI settings as an user profile to disk.
Load User UEFI Setup Profile from Disk
You can load previous saved profile from the disk.
55